200 mm Stroke Pneumatic Cylinder

A 200 mm stroke (20 cm, 7.87 in) is a standard catalogue stroke and is available in every Fenitsa bore from Ø32 to Ø320. The stroke sets how far the rod travels and how much air each cycle uses; the bore sets the force.

Typical 200 mm stroke jobs: transfer between two stations, opening doors and flaps, medium lifting.

Request a Quote
200 mm Stroke Pneumatic Cylinder

Force, Air and Buckling by Bore

Free air per double stroke at 6 and 8 bar; buckling limit with the cylinder pivoted at both ends (Lk ≈ 400 mm, safety factor 3.5).

Force, Air and Buckling by Bore
Bore / rodAir 6 bar (L)Air 8 bar (L)Buckling limit (kg)
Ø32 / Ø122.072.66384
Ø40 / Ø163.204.111,214
Ø50 / Ø205.006.432,964
Ø63 / Ø208.2010.542,964
Ø80 / Ø2513.2417.027,237
Ø100 / Ø2521.0727.087,237
Ø125 / Ø3232.8742.2419,426
Ø160 / Ø4053.9469.3247,426
Ø200 / Ø4085.26109.5747,426

At 200 mm every bore's rod carries more than its 6 bar push force, so buckling does not limit a pivoted cylinder.

Compressor Demand

Free air at 6 bar for 10 double strokes per minute.

Compressor Demand
BoreAir (L/min)
Ø4032.0
Ø6382.0
Ø100210.7
Ø160539.4

Example: a Ø80 cylinder with a 200 mm stroke pushes 301 kg at 6 bar; at 10 cycles per minute it needs about 132.4 L/min of free air, or 7.94 m³/h.

Frequently Asked Questions

Is 200 mm a standard stroke?

Yes. Standard strokes are 50, 100, 125, 160, 200, 250, 300, 350, 400, 450 and 500 mm.

How much air does a Ø63 cylinder with 200 mm stroke use?

About 8.20 litres of free air per double stroke at 6 bar.

Send Us Your Cylinder Data

Bore, rod, stroke, working pressure, mountings and quantity — or a drawing or photo of the cylinder you want to replace. Our engineers reply with a technical proposal and a quotation.

Pneumatic CylindersAir Cylinder Calculator100 mm Stroke Pneumatic Cylinder
Request a Quote

Related Pages