Features
THS Type Hydraulic Cylinders
- Home
- Hydraulic Cylinders
- THS Type Hydraulic Cylinders
Ø40 Ø50 Ø63 Ø80 Ø100 Ø125 Ø160 Ø200
Pressure & Performance
Dimensions and Stroke
Temperature
- Home
- Hydraulic Cylinders
- THS Type Hydraulic Cylinders
Ø40 Ø50 Ø63 Ø80 Ø100 Ø125 Ø160 Ø200
Features
Pressure & Performance
Temperature
Dimensions and Stroke
Why a Welded THS Cylinder?
In the THS series the rear cap is welded to the tube and there are no external tie-rods. For the same bore that means a slimmer envelope, a shorter closed length and fewer parts — ideal for compact machines, tight installation spaces and systems that need a project-specific mounting.
Because the weld is a pressure-bearing zone, weld quality is critical: every cylinder is leak-checked at test pressure before it leaves the plant.
Welded or Tie-Rod?
| THS welded | Tie-rod | |
|---|---|---|
| Envelope | Compact, no external rods | Wider because of the tie-rods |
| Closed length | Shorter | Longer |
| Servicing | Possible, more labour | Very easy |
| Mountings | Lugs and brackets can be welded on to suit | Standard mounting parts |
| Typical use | Mobile, agricultural, tight spaces | Industrial machines, presses |
For the tie-rod design see tie-rod hydraulic cylinders; for a fully custom design, custom hydraulic cylinders.
THS Series Force Table
| Bore | Push 160 bar (t) | Push 250 bar (t) | kN (160 bar) |
|---|---|---|---|
| Ø40 | 2.1 | 3.2 | 20.1 |
| Ø50 | 3.2 | 5.0 | 31.4 |
| Ø63 | 5.1 | 7.9 | 49.9 |
| Ø80 | 8.2 | 12.8 | 80.4 |
| Ø100 | 12.8 | 20.0 | 125.7 |
| Ø125 | 20.0 | 31.3 | 196.3 |
| Ø160 | 32.8 | 51.3 | 321.7 |
| Ø200 | 51.3 | 80.1 | 502.7 |
Calculated with F = p × A; 250 bar is optional. Pull force depends on the rod diameter.
Frequently Asked Questions
What is a THS type hydraulic cylinder?
A compact hydraulic cylinder with the rear cap welded to the tube and no external tie-rods.
Are there disadvantages to welded cylinders?
Resealing takes more labour than on a tie-rod cylinder; in return they are more compact and lighter.
What pressure is the THS series rated for?
160 bar working and 240 bar test pressure, with a 250 bar option.
Can custom mountings be welded onto a THS cylinder?
Yes — the welded body can be designed with lugs and special brackets for your machine.
Fenitsa meets the needs and requirements of the machinery manufacturing sector, especially in pneumatics, to the maximum extent possible.
Some of the images and videos used on the site were created with the help of artificial intelligence.