Place Connection Cylinder

Ø32

Ø40

Ø50

Ø63

Ø80

Ø100

Ø125

Ø160

Ø200

Ø250

Ø320

Get a Quote

Technical Drawing

3D Drawings

Catalog

CETOP SERIES (PAG - PNS)
Cylinder (Ø mm)	D12 Ø	D14	K1	N	O	P	R1	S	T	U	V
32	10	6,6	26	31	18	32	10	8	27,5	51	38
40	12	6,6	28	35	22	36	11	10	30,5	54	41
50	12	9	32	45	30	45	13	12	40,5	65	50
63	16	9	40	50	35	50	15	12	44,5	67	52
80	16	11	50	60	40	63	15	14	57	86	66
100	20	11	60	70	50	71	19	15	65	96	76

CETOP SERIES (PNS)
Cylinder (Ø mm)	D12 Ø	D14	K1	N	O	P	R1	S	T	U	V
125	25	14	70	90	60	90	22,5	20	85	124	94
160	30	14	90	126	88	115	31,5	25	116	156	118
200	30	18	90	130	90	135	31,5	30	125	162	122
250	40	22	110	160	110	165	40	35	153	200	150
320	45	26	120	186	122	200	45	40	182	234	170

ISO SERIES
Cylinder (Ø mm)	D12 Ø	D14	K1	N	O	P	R1	S	T	U	V
32	10	6,6	26	31	18	32	10	8	27,5	51	38
40	12	6,6	28	35	22	36	11	10	30,5	54	41
50	12	9	32	45	30	45	13	12	40,5	65	50
63	16	9	40	50	35	50	15	12	44,5	67	52
80	16	11	50	60	40	63	15	14	57	86	66
100	20	11	60	70	50	71	19	15	65	96	76
125	25	14	70	90	60	90	22,5	20	85	124	94
160	30	14	90	126	88	115	31,5	25	116	156	118
200	30	18	90	130	90	135	31,5	30	125	162	122
250	40	22	110	160	110	165	40	35	153	200	150
320	45	26	120	186	122	200	45	40	182	234	170

What Is a Place (Floor) Connection?

A place connection is the counter bracket bolted to the machine frame or floor that carries the cylinder’s rear hinge on a pin. Together with the hinge it gives the cylinder a pivoting rear mounting.

Its bolts must carry the cylinder’s maximum force, and the mounting surface must be flat and rigid.

What Is a Place (Floor) Connection?
Position	Machine frame or floor
Role	Carries the rear hinge on a pin
Mounting note	Rigid, flat surface, adequate bolts

See all custom cylinders and connection equipment, or contact us for a quotation.

Frequently Asked Questions

What does a place bracket do?

It is the counterpart that pins the cylinder’s rear hinge to the machine.

Are hinge and bracket used together?

Yes — together they form a pivoting joint.

What to watch during mounting?

A rigid flat surface, correct bolt size and alignment.